Does anyone know where I can find a 15cm x 20cm piece of nice sticky rubber for a knee(bar) pad?

Like this:

I've tried using a piece of rubber from a car tyre inner, but its pretty smooth and not exactly sticky.
Any resolers out there willing to sell a piece of C4 or similiar?

You planning on climbing INXS?

Howzit Pierre. We can help you with a 2mm or 4 mm thick piece of really sticky rubber from our climbing shoe resole workshop in Johannesburg. Please mail me: chris@verticalworld.co.za

Cape Town Rubber Co. in Paarden Eiland (if you're in CT)

http://www.ctrubber.co.za/

Just an idea, you can also go to a truck tyre replacement centre and ask them for old inner tubes. Most of the inner tubes are a very hard rubber, but the older higher quality tubes will be good sticky stuff on the inside of the tube. Only reason I know is because I used to make juggling sticks out of the stuff back in the day and tried to find the stickiest cheapest rubber. They should give you the tubes for free because they throw them out anyways.

You could also just visit Cape Town Rubber, pay a few bucks and save you getting your hands dirty

Thanks for the replies guys.

@Neil - no not kneepad as in protective hard shell for Spitzkoppe granite/aid/big walling, more like kneepad as in kneebar pad with sticky rubber to kneebar limestone tufas all day long.

@Lee - I've made one with inner tube rubber. It works ok but it's not ideal, the rubber as you mention is a bit hard and not as sticky compared to the rubber I've seen on the euroclimber dude's knee pads. There's a componay or two making them in the overseas http://www.upskillclimbinggear.com/upskill-friction-kneebar-pad/ but at between $35 and $60 exlcuding shipping I'm not that keen. I'm pretty sure they just use the 2mm rand rubber the resolers use (Stealth C4 on your knee is pretty cool, check Dave Graham's extra hand in this: http://vimeo.com/38377140)

@Chris - I've sent you a mail thanks

I'll post pics when it's done.

5.10 have started making and selling knee pads if you are feeling flush.

Chris F you mean this 50 quid item? Dayum.http://www.cragxclimbing.com/climbing-gear/climbing-essentialsaccessories/510-neon-knee-pad-p-7116.html

Pierre, I got to wear some of these pads. Joey let me use his while he was here. They are really easy to make. I have already spoken with Chris about making them. I've been meaning to do it for ages.

Use the 2mm rubber, not the 5mm. I need to have them made soon too...

_________________
I hate this real world place... I'd be more than happy to live out there rather...

I have often wondered how much more one gains using a purpose built pad vs a quarter of a car inner tube. i know i swet like a gimp in my inner tubes, but i have never thought badly of them.

I remember Dave Richardson working Paragon without using kneepads (for moral reasons), this only allowed him one or two attempts before the bruising was too painful to allow more. took him years to send the route but he refused pads.

_________________
Sandbagging is a dirty game

Inner tubes usually have a fine coat of powdery stuff on them

-Wash them
-Take the scourer that comes with a bicycle repair kit, or some rough sandpaper, and scour the surface a little.

It makes a big difference... Everyone who knows me, knows I love my Continental bicycle inner tube: because it does not have any powder on it and it's super sticky... BUT when I used some proper 5.10 stealth rubber knee pads I was astonished at how good they were for friction... Plus they are a little more rigid and thus less pain when there is a sharp kneebar

_________________
I hate this real world place... I'd be more than happy to live out there rather...

Brian, I read this from Steph Davis about Joe's custom pads. Pity Boulder is a bit far, but I've got the same knee guard, just need the rubber.
http://www.highinfatuation.com/blog/how ... knee-pads/

hahahaha that's just gross man.

Inner tubes also have a 3d curve to them, which makes stiching+gluing onto a 2d curved surface tricky.

Hi Pierre

Put it on a belt sander

I cut my inner tubes with the 3d shape in mind: very narrow behind the knee extending to as wide as the stretch will allow. thay are actually a very hard thing to cut right as different kneebars require different points on the thigh to be protected. inner knee needs more than outter etc

like i say the only reason why i would move from this system would be to gett better breathability, but i can't see how

_________________
Sandbagging is a dirty game

Couldnt you use a punch and pop some holes in it so you dont "gimp up" this would also help with the friction problem.

Pierre are you coming to movie night @ Shepstone Gardens tonight?

That'll be the one. Like I said, if you are feeling flush.

This article is quite handy

When u dont have a kneepad...... campus, its less moves, more fun and gets u there faster:) My question is, when does extra rubber become aid gear?

When climbing shoes do...